Tubeology Headlines:

Purchase Tubeology

Purchase: Purchase through our Authorised Dealer Network
Tubeology is sold through authorised dealers only.
Please use the link above for the dealer locator or telephone 0845 401 0005
or +44 845 401 0005 where our sales staff can
direct you to dealers that already have their stock of Tubeology

Tubeology Vice Adapter

Zoom

Model: s-vice
Purchase: Purchase through our Authorised Dealer Network
SRP: £22.99

These are Tubeology Spares only not full kits.

Tubeology Vice CAdapterlamp - Spares

Any Fly Tyer knows that once you turn to metal tubes with or without lining – you run into all kinds of trouble. Normally bare tubes are very unforgiving when it comes to grip, there simply is no grip! Quite often the only way to hold a metal tube is sheer force. However the Tubeology system is designed for fly tyers. With its collar designed at the front to stop your thread from slipping off the head and to angle your wings. The Tubeology Vice Clamp caters for the keys requirements for metal Tube Fly tying:

The vice clamp makes sure the tube does not rotate.
The vice clamp is sturdy with the ability to hold the tube without wobble in your vice. This enables you to pull on the tying thread without everything giving.

The Tubeology Tube Vice Clamp allows you to add on the hook retainer to help you tie the correct length hairwing and materials to your fly.

Hint: When tying a whip finish as the head is clamped in the vice you MUST form a large loop with your fingers and slip this over the fly to tie off.
Hint: Always tie in a clockwise direction, this ensures that the tube does not turn once tightened in the clamp.

ALTHOUGH SLOWER FOR TYING A WHIP FINISH THIS VICE CLAMP STOPS YOUR TUBE SLIPPING EVER! NEVER DAMAGE ANY JUNGLE COCK OR HAIRWINGS AGAIN

Product Keywords:

Using Tubeology Tube Fly Vise Attachment

The Tubeology vise attachment allows tying of Tubeology tube flies without slippage unlike any other tube fly system on the market. The vise adapter fits all of the Tubeology Tubes from 14mm to 50mm.

Add the Tubeology vise adapter to any standard vise.

Slide the tube over the tube rod.

Screw the vise end-stop onto the end of the steel retaining rod. The vise end-stop has two screw threads one of which fits the metal retaining rod and a clever second retaining rod which is used to screw the threaded Tubeology tube to stop it from turning.